Measurement Accuracy and Risks in Quality Control

M.V. Golobokov, Metrology Engineer, State Regional Center of Standardization, Metrology and Testing in Novosibirsk region, Novosibirsk, Russia, malachit_40@inbox.ru

Prof. Dr. S.B. Danilevich, Professor, Academy of Standardization, Metrology and Certification (Novosibirsk Branch),

Novosibirsk State Technical University, Novosibirsk, Russia, ser-danilevich@yandex.ru

Dr. T.M. Solov’eva, Senior Teacher, Department of Metrology and Technology of Optical Production, Siberian State

University of Geosystems and Technologies, Novosibirsk, Russia, s_t_m_83@mail.ru

key words

quality management, control

errors of the 1st and the 2nd kind, customer’s and producer’s risks

References

We have offered to discuss the appropriateness of specifying the concept of risk, formulated in the standards GOST R ISO 9000–2015 and GOST R ISO 9001–2015, as well as some provisions of GOST R 8.731–2010. We particularly consider it is appropriate to follow the GOST R 8.563-2009 up with the concept of control procedure attestation (testing) and probabilistic indicators of products control results’ reliability (testing).

We have also proposed to add paragraph 5.1.1 GOST R 8.563, adding to the list of initial data. It’s necessary in developing measurement and control techniques, the item requirements for parameters of control (testing) results’ reliability.

We believe it will help to implement evidence-based approach to the developing of effective products control (testing) methods.

1. Danilevich S.B. O legitimizatsii pokazateley dostovernosti rezul’tatov kontrolya i ispytaniy produktsii [On legitimization the indicators of reliability the results of product’s control and testing], Kompetentnost’, 2012, no. 6, pp. 49–51.
2. Danilevich S.B., Kolesnikov S.S. Razrabotka metodik effektivnogo kontrolya slozhnykh ob’ektov [Development the methodologies of effective controlling complex objects], Izmeritel’naya tekhnika, 2007, no. 5, pp.19–22.
3. Zil’berbrand G.E. Vybor i primenenie pokazateley dostovernosti rezul’tatov kontrolya i ispytaniy [Selection and application the indicators of reliability the control’s and tests’ results], Kompetentnost’, 2013, no. 4, pp. 44–46.
4. GOST R 8.731–2010 State system for ensuring the uniformity of measurements. Tolerance control systems. Main principles.
5. JCGM 106: 2012 Evaluation of measurement data — The role of measurement uncertainty in conformity assessment.
6. Zhagora N.A. Vliyanie tochnosti izmereniy na rezul’taty otsenki sootvetstviya [Influence of the measurement accuracy at the conformity assessment’s results], Kontrol’ kachestva produktsii, 2016, no. 4, pp. 29–34.
7. Golobokov М.V., Danilevich S.B. Imitatsionnaya model’ protsedury poverki sredstv izmereniy [Simulation model of measuring instruments’ calibration procedure], Kompetentnost’, 2016, no. 4, pp. 40–47.
8. Lakhov V.M. Aktual’nye voprosy zakonodatel’noy metrologii [Topical issues of legal metrology], Kompetentnost’, 2007, no. 8, pp. 32–37.
9. GOST R 1.11–99 State system for standardization of Russian Federation. Metrological expert evaluation of state standards projects.
10. GOST 8.051–81 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm.
11. GOST R 8.580–2001 State system for ensuring the uniformity of measurements. Determination and application of precision data in relation to petroleum products tests methods.
12. GOST R 51814.5–2005 Management quality systems for automotive industry. Measurement systems analysis.
13. MI 1317–2004 State system for ensuring the uniformity of measurements. Results and characteristics of measurement error. Submission forms. Methods of using at testing product samples and at controlling their parameters.
14. Rubichev N.А., Frumkin V.D. Dostovernost’ dopuskovogo kontrolya kachestva [The reliability of pre-commission quality control],

Izdatel’stvo standartov, Moscow, 1990, 172 P.

15. Danilevich S.B., Kolesnikov S.S., Pal’chun Yu.A. Primenenie imitatsionnogo modelirovaniya pri attestatsii metodik kontrolya i ispytaniy
[The use of simulation modelling at attestation the control and testing methods], Izmeritel’naya tekhnika, 2011, no. 7, pp. 70–73.
16. Danilevich S.B. Opredelenie trebovaniy k tochnosti vypolnyaemykh pri kontrole izmereniy [Definition of requirements to the accuracy of the measurements at control], Kompetentnost’, 2016, no. 2, pp. 48–51.