Conformity Assessment of New Materials Using Standard Samples and Methods of High Level Measurement

Prof. Dr. E.N. Kablov, Academician of RAN, General Director, Russian Academy of Sciences, Federal State Unitary

Enterprise All-Russian Institute of Aviation Materials (ARIAM), Moscow, Russia, admin@viam.ru

Dr. Е.B. Chabina, Deputy Head, Testing Сenter of Federal State Unitary Enterprise ARIAM, Moscow, Russia, chabinaeb@viam.ru Dr. G.А. Morozov, Deputy Head, Quality Service of Federal State Unitary Enterprise ARIAM, Moscow, Russia, tk_182@viam.ru Assoc. Prof. Dr. N.P. Muravskaya, Deputy Head, Federal State Unitary Enterprise All-Russian Research Institute

for Optical and Physical Measurements, Moscow, Russia

key words

standard sample, measurement method, measuring instruments, primary standard, structure, composition, heat-resistant nickel alloy

References

We have reviewed the quality control problem of created the new metallic materials with preset performance characteristics on the example of heat-resistant nickel alloys. It requires controlling not only chemical composition and mechanical properties of the material, but also its structural-phased state. We have shown, how the problem of development and certification of the chemical composition standard samples of alloys and standard samples of structure as well as a high level measurement techniques is solved within the industry of the Center of metrological support and conformity assessment of nanotechnologies products and nanoindustry in the direction of composite nanomaterials. We have prepared the article as a part of the complex problem Fundamentally oriented research (Strategic directions of developing materials and technologies for their processing for the period up to 2030).

1. Kablov E.N. Innovative developments of FSUE ARIAM RF SRC to implement the Strategic directions of materials and technologies development to process them for the period up to 2030, Aviatsionnye materialy i tekhnologii, 2015, no. 1 (34), pp. 3–33.
2. Kablov E.N. A new generation of materials — the basis of innovation, technology leadership and national security of Russia, Intellekt & Tekhnologii, 2016, no. 2 (14), pp. 41–46.
3. Kablov E.N. Modern materials — the basis of innovative modernization of Russia, Metally Evrazii, 2012, no. 3, pp. 10–15.
4. Kablov E.N., Lomberg B.S., Ospennikova O.G. Creation of modern high-temperature materials and technologies of their production for aeroengine industry,

Kryl’ya Rodiny, 2012, no. 3–4, pp. 34–38.

5. Kablov E.N., Ospennikova O.G., Lomberg B.S., Sidorov V.V. Priority areas for developing production technologies of high-temperature materials for the aeroengine industry, Problemy chernoy metallurgii i materialovedeniya, 2013, no. 3, pp. 47–54.
6. Karpov Yu.A., Baranovskaya V.B. The role and possibilities of analytical control in metallurgy, Tsvetnye metally, 2016, no. 8 (844), pp. 63–67.
7. Letov A.F., Karachevtsev F.N., Gundobin N.V., Titov V.I. Development of standard samples of alloys’ structure of aviation designation, Aviatsionnye materialy i tekhnologii, 2012, no. S, pp. 393–398.
8. Kablov E.N., Chabina E.B., Lutsenko A.N. Current status and problem questions of nanomaterials and nanotechnology application in aviation materials science, Minsk, Belaruskaya navuka, 2015, pp. 137–144.
9. Metrological assurance of nanotechnology and nanoindustry products, Moscow, LOGOS, 2011, 586 P.
10. Chabina E.B., Morozov G.A., Lutsenko A.N., Skripachev S.Yu. ARIAM prospective developments in the field of nanomaterials and nanotechnologies,

Entsiklopedicheskiy spravochnik, 2012, no. 6, pp. 9–15.

11. Chabina E.B., Alekseev A.A., Filonova E.V., Lukina E.A. Application the methods of analytical microscopy and X-ray analysis for the study of structural and phase materials’ state, Trudy VIAM, 2013, no. 5; URL: http://www.viam-works.ru.
12. Turchenkov V.A., Baranov D.E., Gagarin M.V., Shishkin M.D. Methodical approach to the materials’ examination, Aviatsionnye materialy i tekhnologii, 2012, no. 1, pp. 47–53.
13. Kablov E.N., Petrushin N.V., Svetlov I.L., Demonis I.M. Nickel foundries heat-resistant alloys of new generation, Aviatsionnye materialy i tekhnologii, 2012, no. S, pp. 36–51.
14. Bazyleva O.A., Arginbaeva E.G., Turenko E.Yu. High-temperature foundries intermetallic alloys, Aviatsionnye materialy i tekhnologii, 2012, no. S, pp. 57–60.
15. Kablov E.N., Ospennikova O.G., Lomberg B.S. Complex innovative technology of isothermal stamping in the air in a mode of superplasticity super high- temperature alloys’ discs, Aviatsionnye materialy i tekhnologii, 2012, no. S, pp. 129–141.
16. Chabina E.B., Filonova E.V., Lomberg B.S., Bakradze M.M. The structure of modern wrought nickel alloys, Vse materially, Entsiklopedicheskiy spravochnik, 2012, no. 6, pp. 22–27.
17. Karachevtsev F.N., Letov A.F., Protsenko O.M., Yakimova M.S. Standard samples’ development of aircraft alloys’ structure, Standartnye obraztsy, 2013, no. 4, pp. 30–34.
18. Kablov E.N., Bronfin M.B. Effect of S.T. Kishkin, or why the structure of the heat-resistant nickel alloys should be heterophase, Moscow, Nauka, 2006, pp. 7–14.
19. Baratova N.S., Osintseva E.V., Kremleva O.N. Global distribution of standard samples, Review, Standartnye obraztsy, 2014, no. 4, pp. 36–43.
20. Letov A.F., Karachevtsev F.N. Experience in developing standard samples of air alloys, Mir izmereniy, 2012, no. 8, pp. 31–35.
21. Semenko N.G., Paneeva V.I., Lakhov V.M. Standard samples in the system for assuring the uniformity of measurements, Moscow, Izdatel’stvo standartov, 1990,
287 P.
22. Eroshkin S.G., Orlov G.V. The study of uniformity of standard samples wrought nickel alloy’s material HHRWA 175-ID, Trudy VIAM, 2015, no. 8, article 11; URL:
http://www.viam-works.ru.
23. Kablov E.N., Morozov G.A., Krutikov V.N., Muravskaya N.P. Attestation of standard samples composition of complex alloys with the use of ethanol, Aviatsionnye materialy i tekhnologii, 2012, no. 2, pp. 9–11.
24. Karachevtsev F.N., Zagvozdkina T.N., Orlov G.V. Developing and researching the metrological characteristics of express methods of heat-resistant nickel alloys’
analysis, Trudy VIAM, 2015, no. 11, article 09; URL: http://www.viam-works.ru.
25. Mekhanik E.A., Min P.G., Gundobin N.V., Rastegaeva G.Yu. Determination of the sulfur’s mass fraction in the heat-resistant nickel alloys and steels in the concentration range from 0.0001 to 0.0009 % (by weight), Trudy VIAM, 2014, no. 9, article 12; URL: http://www.viam-works.ru.
26. Yakimovich P.V., Alekseev A.V., Min P.G. Determination of low phosphorus contents in the heat-resistant nickel alloys by method of Inductively coupled plasma mass spectrometry, Trudy VIAM, 2014, no. 10, article 02; URL: http://www.viam-works.ru.
27. Alekseev A.V., Yakimovich P.V. Determination of arsenic and selenium in the heat-resistant nickel alloys by method of Inductively coupled plasma mass spectrometry with a hydride vapor generation, Trudy VIAM, 2014, no. 11, article 09; URL: http://www.viam-works.ru.
28. Yakimovich P.V., Alekseev A.V. Determination of gallium, germanium, arsenic and selenium in the heat-resistant nickel alloys microalloyed rare earth elements, by method of Inductively coupled plasma mass spectrometry, Trudy VIAM, 2015, no. 3, article 09; URL: http://www.viam-works.ru.
29. Chabina E.B., Zaytsev D.V., Alekseev A.A., Sbitneva S.V. Investigation of structure and developing a set of standard samples of composition and structure of heat-resistant nickel and intermetallic alloys, Standartnye obraztsy, 2016, no. 1, pp. 31–30.
30. Chabina E.B., Filonova E.V., Zaytsev D.V. Quantitative analysis for the parameters of wrought nickel alloys’ structure with the use of standard samples of composition and structure, Izmeritel’naya tekhnika, 2015, no. 9, pp. 71–73.